If you are a treadmill owner, you know how important it is to have a working display.
The display shows you vital information such as your speed, distance, time, calories, and heart rate. It also allows you to adjust the settings and programs of your treadmill.
Without a display, you are left in the dark about your workout performance and progress.
But what if your treadmill display suddenly goes blank or white? What causes this problem and how can you fix it?
In this article, we will answer these questions and provide you with the ultimate guide on how to fix a treadmill with no display.
What causes a treadmill display to go blank or white?
When dealing with a blank (white) screen issue on your treadmill, various factors could be causing the problem.
Let’s explore the potential culprits one by one:
- Power Source Problems: The treadmill’s display may not light up if it’s not correctly plugged in, has a faulty power cord, or is connected to a tripped circuit breaker.
- Power Cable Troubles: A damaged, pinched, or crimped power cable could interfere with the treadmill’s power supply or even lead to a short circuit. It’s crucial to inspect the power cable thoroughly and make sure it’s not obstructed by the treadmill’s frame or any other objects.
- Cable Connection Hiccups: Loose or disconnected cable connections between the console and the lower board can disrupt communication, hindering the proper functioning of the motor and other treadmill functions.
- Console Malfunctions: If your treadmill’s console is defective, damaged, or simply worn out, it may struggle to display information accurately or at all. Checking the condition of the console and considering a replacement, if needed, can be a viable solution.
- Software issues: If your treadmill’s iFit software is corrupted, outdated, or incompatible, it may not be able to load or run properly on the display.
- Lower Board Problems: Issues with the treadmill’s lower board, such as being faulty, burned out, or overheated, can lead to screen display problems. Verifying the condition of the lower board and seeking professional assistance if necessary can help address this issue.
How to fix a treadmill with no display?
Step 1: Check the Power Source
The first thing you should do is check the power source of your treadmill.
Make sure that the power cord is securely plugged into the wall outlet and that the treadmill switch is turned on.
If you are using a surge protector, make sure that it is working properly and that it has not tripped.
You can test the outlet by plugging in another device and seeing if it works.
If the power source is fine, move on to the next step.
Step 2: Check the Power Cable
The next thing you should do is check the power cable of your treadmill.
Sometimes, the power cable can get pinched or crimped by the treadmill frame or other objects, causing damage or interference.
To check the power cable, unplug the treadmill from the wall outlet and wait for 60 seconds. This will allow the lower board to discharge any built-up energy.
Then, inspect the power cable for any signs of damage or wear. If you find any, replace the power cable with a new one.
Step 3: Check the Circuit Breaker
The third thing you should do is check the circuit breaker of your treadmill. Sometimes, the circuit breaker can trip due to a power surge or overload, cutting off the power to your treadmill.
To check the circuit breaker, find the power control box for your outlet and verify that the specified circuit has not been tripped.
If it has, reset it by flipping it back on.
If the circuit breaker is fine, move on to the next step.
Step 4: Check the Cable Connections
The fourth and final thing you should do is check the cable connections of your treadmill.
To check the cable connections, turn off the power and unplug the treadmill from the wall outlet. Wait for 60 seconds until all red LED lights on the lower board have gone off.
Then, remove the motor cover and inspect all the wires connected to the lower board. Make sure that they are firmly attached and not damaged.
You should also check the communication cable that runs from the console to the lower board.
This cable is usually located under one of the uprights or behind one of the plastic covers on either side of your treadmill.
Make sure that this cable is not pinched or cut and that it is securely plugged into both ends.
Fixing the White Screen on NordicTrack: Reinstalling iFit Software
Many treadmill users have reported that their display screen turns white because of the iFit software.
iFit is a fitness app that works with some treadmills, such as NordicTrack, to provide interactive workouts and personalized coaching.
However, sometimes the iFit software may malfunction and cause the display screen to go blank.
If you encounter this problem while using iFit on your treadmill, you can try the following steps to fix it:
- Prepare for Reinstallation: Begin by turning off your treadmill and gently unplugging it from the power source.
- Locate the Reset Button: Now, position yourself in front of the treadmill console and direct your attention to the upper right corner, where you’ll find the reset button nestled discreetly. It is usually a small pin-sized hole located next to a USB or HDMI port.
- Engage the Reset Button: With your trusty paper clip or needle in hand, carefully press and hold the reset button. This action initiates the reboot process and allows us to start afresh with the reinstallation.
- Power Up and Hold: Now, plug the treadmill back into the power source and power it on.
- A Reassuring Message: Ah, behold! As the screen illuminates with renewed vigor, a comforting message graces our sight – “Reinstalling the software.” This encouraging message serves as a confirmation that we are indeed on the right path to rectifying the issue.
- Watch the Progress Bar: This visual representation of progress reassures us that the iFit software is being reinstalled with precision and care.
- Follow the Guiding Prompts: As the software reinstalls itself, be prepared to encounter a series of guiding prompts that gently steer us through the final steps. These prompts may include reconnecting to your trusted Wi-Fi network and gracefully logging back into your iFit account.
Here is a video:
Final Thoughts on Resolving Blank Screen on a Treadmill
We hope this article has helped you fix your treadmill display problem.
You can fix the white screen problem of most Treadmills by following these simple measures: check the power supply and power cord, check the cable connection, or reinstall the iFit software.
If the problem persists despite following the previous steps, it’s time to reach out to the treadmill’s customer support.
Hi! I’m Chris Lewis. I’m a certified personal trainer with over 10 years of experience helping clients achieve fitness goals. As someone passionate about fitness, I understand the importance of living a healthy and positive lifestyle–and I want to help others achieve this goal. Whether you want to lose weight, exercise muscles, or just improve your overall health, I will guide and support you in every step.
